Thursday, February 16, 2017

Set Design: Concepts for "Mr Science"

Last month I wrote a brief piece about a television series pilot/demo show that I produced a few years ago. Mr Science did not have any takers but the process of writing, designing, and producing the one-off was one of those endeavours that I found satisfying on a creative level. There were problems (always), some bumps, but I learned a lot.


The main, and only, standing set was that of a science laboratory. Here is an early concept I sketched:



And here is a floor plan view of that concept:



Eventually, but rather quickly, I finalized my set design. Here is a thumbnail sketch of the floor plan and elevations:



In case the show were to sell, or if I wanted to make the set in a larger scale, I worked out some concepts for something a little more elaborate than what I conceived for the simple pilot show:



Here is a more elaborate version of the design I settled on in that it has a ceiling:



Soon I will post a photograph of the completed set.

4 comments:

  1. Thank you!

    The first picture/sketch was a minimalist idea: Three 10' x 4' flats, a center module, and a cyclorama painted black or green. I decided to go for solid walls in the end.

    Soon I will post sketches of different paint schemes for the flats.

    ReplyDelete
  2. If you were to make the roof attachment what were your plans for lighting?

    ReplyDelete
  3. It's a 'fly' ceiling. It would be used for some shots; wide, or low angle looking up.

    ReplyDelete